iso 9001 wire rope lifting slings
"
ASME B30.9 веревочка провода гнезда обжимки 0,5 дюймов открытая
1" Open Swage Socket (with cotter pin), End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Open Swage Socket is an open type swage socket with a spring pin. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. The Open Swage Socket is available for wire rope with a diameter from 6.35mm to 50.8mm. - Reference standard: ASME B30.9 - Our Swage Sockets are recommended used for wire ropes feature 6 x 19
Стоп конца веревочки провода 0,75 дюймов, закрытое гнездо обжимки
3/4" Closed Swage Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Closed Swage Socket is forged from high tensile steel, while galvanization ensures its long-term durability. The Closde Swage Socket is available for wire rope with a diameter from 1/4" to 2". - Reference standard: ASME B30.9 - Our Swage Sockets are recommended used for wire ropes feature 6 x 19, 6 x 25, 6 x 37 construction, with tension strength ranging from 1670
EN 13411-1 9/16" веревочка провода глаза кольца бросает низкоуглеродистую слабую сталь
9/16" Wire Rope Sling with Standard Thimble Eye, Eye Sling, greater protection against wear and deformation of the wire rope eye Wire Rope Sling and Wire Rope attachment Product Description Our Standard Thimbles are galvanized thimbles according to EN 13411-1 for making a 'hard' eye with wire rope, it creates a loop at wire rope ends. The thimbles provide a means for connecting wire rope to attachments. They are good for light duty rigging applications and ideally suited for
1-1/8» стоп конца веревочки провода, закрытое гнездо Spelter
1-1/8" Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Closed Spelter Socket is made in accordance with RR-S-550D requirements, and available for wire rope with a diameter from 1/4" to 5".
Собрание слинга веревочки провода EN 13411-4 70mm, гнездо смычка 5:1 короткое
70mm Wire Rope Sling with Short Bow Socket, Closed Spelter Socket Sling, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Short Bow Socket is a closed spelter socket. The socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Short Bow Socket meets RR-S-550D (type B) requirements and is
3/8" собрание слинга веревочки провода, ASME B30.9 закрыло гнездо обжимки
3/8" Wire Rope Sling with Closed Swage Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic
Слинг веревочки провода кольца 3 дюймов FF-T-276B слабый стальной, слинг глаза кольца
3" Wire Rope Sling with Heavy Duty Thimble, Eye Sling, greater protection against wear and deformation of the wire rope eye Wire Rope Sling and Wire Rope attachment Product Description Our Heavy Duty Thimble is designed for use with high-performance wire rope. The thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. The thimble creates a 'hard' eye at wire rope ends, making it features greater protection against wear and deformation of the
Слинги 1770 веревочки провода с сердечником MPa стальные с 4 ногами
Two-leg Swaged Wire Rope Sling (Steel Core) The wire rope slings feature 6 x 37 (a)+ IWRC construction classification, with 1770 MPa in tensile strength. Product Description - Surface treatment of wire ropes can be galvanized and grease free,galvanized with grease and uncoated with grease. - The wire rope structure, tensile strength and working load limit could be customized upon request. - Safety factor is 5:1 for the sling, 4:1 for the Master Link and Hook, and 6:1 for the
Рука ядра волокна соединила собрание слинга веревочки провода гальванизировала стальной материал
Hand Spliced Wire Rope Sling (Fibre Core) Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Hand-spliced ropes can be complete without the need for a thimble, while they often being
